ErGear
Single Monitor Arm, Tool-Free VESA
Monitor Mounts

Single Monitor Arm, Tool-Free VESA

A monitor that gets moved between desks

$19.99$31.99 4.4 (4,128)

Nothing is sold on this site. Every buying link opens the same item at the retail partner who handles payment, delivery and returns.

What it is for

Tool-free assembly sounds like a convenience feature until a monitor has to come down twice a year, at which point it becomes the reason the arm gets used at all. This one takes screens from 13 to 34 inches up to 19.8 lbs and goes together with hand-tightened joints, so a screen can be dismounted for a house move or a desk swap without hunting for the hex key that came in the box.

Check before you order. Toolless clamps need re-checking. Give the desk clamp a firm hand-tighten again after the first week, because a joint tightened without a lever settles slightly once it has carried a load overnight.

What assembly actually means

Genuinely toolless for the arm itself; the VESA plate on the back of the monitor still uses the screws that came with the screen. Expect ten minutes for a first install and about two for every one after that, which is the point of the design.

What it changes

  • Hand-tightened joints can be loosened and re-set by feel, so the arm can be repositioned during the working day rather than only during setup.
  • A 34 inch capacity covers the common wide office monitor, which the cheapest arms usually stop just short of.
  • The extra 2.2 lbs of headroom over the basic arm is enough to bring a lot of mid-weight 27 inch panels inside the rating.

In one line each

  • Single-screen arm for 13 to 34 inch displays
  • Weight rating 19.8 lbs
  • Fits 75 by 75 and 100 by 100 mm VESA holes
  • Clamp or grommet mounting, no tools for the arm
  • Full tilt, swivel and rotation at the head

Published figures

Screens1
Screen size13 to 34 in
Load per arm19.8 lb
VESA75x75 / 100x100 mm
MountingC-clamp or grommet
MovementSwivel, tilt
Max tilt80 degrees
Cable routingYes
ColourBlack
Model referenceB0FQM6QB48

Figures as published for this model. Anything that has never been published is left out rather than estimated.

Where this one sits among the 18

The same figures as every other page in this section, lined up against the section itself. Being the biggest at something is not the same as being the best at it, so the last column says where a number puts this model and leaves the judgement to you.

FigureThis modelAll 18 mountsWhere that puts it
Largest screen it takes34 in27 to 49 inBigger than 12 of the other 17
Smallest screen it takes13 in13 to 17 inThe smallest of the 18
Weight per arm19.8 lb17.6 to 37.4 lbStronger than 7 of the other 17
Screens carried11 to 3The fewest of the 18

Ranges cover only the mounts that publish the figure at all; a model that has never published one is left out of that row rather than counted as a zero.

What the extra money actually buys

Figures on which this model beats every cheaper mount in the section, rather than beating a convenient one.

Where it sits in the range

Of the 18 mounts in this section this is the second cheapest: 1 costs less, 16 cost more, and the section runs from $19.98 to $89.99. It carries a published list price of $31.99, so the figure above is below that rather than the usual asking price.

Against everything cheaper in the section it is ahead on two figures: largest screen it takes at 34 in and weight per arm at 19.8 lb. That is the useful comparison, because it is the part of the price you can point at.

It carries 4,128 customer reviews at 4.4 out of five, with 7 of the other 17 rated higher. Those numbers come from the retail listing and are reproduced rather than curated, including when they are unflattering.

What the box says

The product description exactly as it ships with the listing, unedited, so everything written above can be checked against it.

Ultrawide Compatibility
The ErGear heavy-duty monitor arm is compatible with most 13″-34″ flat or curved monitors up to 19.8 lbs with VESA mounting patterns 75x75mm or 100x100mm. Please verify the screen size, weight, and VESA pattern of your monitor before purchase.
Engineered for Lasting Performance
This adjustable monitor arm features a 40% wider VESA head and a tighter-fitting VESA panel to enhance stability and keep your monitor firmly in place. The high-performance durable core has been tested through 20,000+ cycles, delivering smooth, effortless adjustments and dependable performance for years of daily use.
Full Motion Flexibility
This premium VESA monitor mount delivers precise height adjustment up to 17.5″ and reach up to 18.1″, helping you achieve the perfect eye-level position to reduce neck and shoulder strain. It features +80 degrees/-50 degrees tilt, ±90 degrees swivel, and 360 degrees rotation, so you can always find your ideal viewing angle.
Streamlined Finish with Cable Management
The upgraded cable clips open easily with no tools required, making cable organization faster and more convenient. This monitor arm lifts your screen to free up desk space while keeping cables tidy, helping you stay focused and productive in a clean, clutter-free workspace.
Quick Setup with Tool-Free VESA Mounting
Set up in just three easy steps! Our computer monitor mount upgraded VESA plate enables tool-free mounting, saving time and avoiding complex installation. We offer two desk mounting options: C-clamp mounting for desks 0.39″-2.56″ thick, or grommet base mounting for desks 0.39″-2.95″ thick.