ErGear
Steel Dual Monitor Mount, up to 33 in
Monitor Mounts

Steel Dual Monitor Mount, up to 33 in

A dual setup that must not wobble

$59.99 4.5 (6,307)

Nothing is sold on this site. Every buying link opens the same item at the retail partner who handles payment, delivery and returns.

What it is for

Screen wobble on a sit-stand desk is usually the mount, not the desk, and it gets worse as the desk goes up. This dual mount is the stiff answer in the range: heavier steel sections, 17 to 33 inch screens, 22 lbs per arm. It costs more than the popular dual stand and the difference is entirely in how still the screens stay when the desk is typed on at standing height.

Check before you order. A stiff mount transfers desk movement rather than absorbing it, so it only pays off on a desk that is itself solid. On a light or wobbly desk the extra cost buys nothing that the standard dual mount does not already provide.

What assembly actually means

Heavier sections make this the least forgiving mount to assemble alone, and the one where the clamp should be seated over a solid section of desk from the outset. Fit both arms empty, check the post is vertical, then load. Do not tighten the head joints fully until both screens are aligned to each other.

What it changes

  • Stiffer sections damp the bounce that a raised standing desk transmits from the keyboard to the screens.
  • A 17 inch lower limit reflects the intent: this is a mount for two proper monitors, not for a screen and a small secondary panel.
  • Twenty-two pounds per arm keeps two 32 inch panels comfortably inside the rating rather than at its edge.

In one line each

  • Reinforced steel dual monitor mount
  • Supports screens from 17 to 33 inches
  • Weight rating 22 lbs per arm
  • VESA 75 by 75 and 100 by 100 mm
  • Clamp or grommet fixing to the desk edge

Published figures

Screens2
Screen size17 to 33 in
Load per arm22 lb
VESA75x75 / 100x100 mm
MountingC-clamp and grommet base
Desk thickness0.39 to 2.56 in
MovementTilt, swivel, rotate, height
Max tilt90 degrees
ColourBlack
Model referenceB0C7KQ7MX8

Figures as published for this model. Anything that has never been published is left out rather than estimated.

Where this one sits among the 18

The same figures as every other page in this section, lined up against the section itself. Being the biggest at something is not the same as being the best at it, so the last column says where a number puts this model and leaves the judgement to you.

FigureThis modelAll 18 mountsWhere that puts it
Largest screen it takes33 in27 to 49 inBigger than 10 of the other 17
Smallest screen it takes17 in13 to 17 inThe largest of the 18
Weight per arm22 lb17.6 to 37.4 lbStronger than 11 of the other 17
Screens carried21 to 3More than 6 of the other 17

Ranges cover only the mounts that publish the figure at all; a model that has never published one is left out of that row rather than counted as a zero.

Where it sits in the range

Of the 18 mounts in this section this is the 14th cheapest: 13 cost less, 4 cost more, and the section runs from $19.98 to $89.99.

There is no figure here on which it beats everything cheaper in the section, so if none of the 13 below it is missing something you need, the difference is colour, top size or finish rather than capability.

It carries 6,307 customer reviews at 4.5 out of five, which is the highest rating in the section. Those numbers come from the retail listing and are reproduced rather than curated, including when they are unflattering.

What the box says

The product description exactly as it ships with the listing, unedited, so everything written above can be checked against it.

Computer Compatibility
To ensure compatibility of the dual monitor stand, each of your monitors must meet three conditions: Firstly, computer screen size range: 17 to 33 inches. Secondly, screen weight range: 4.4 to 22 lbs. Thirdly, there must be VESA mounting holes on the back of the monitor screen that are spaced 75x75 mm or 100x100 mm apart. Please make sure that your monitor meets all of the above conditions before purchasing.
Maximum Flexibility
The monitor stand features +/-90 degrees left and right swivel for multi-screen co-driving, +90 degrees to -35 degrees up and down tilt for your office comfort, and 360 degrees swivel for landscape and portrait modes.
Height & Extension Adjustment
The dual monitor arm for 2 monitors can be positioned as high as 17.5″ above the desk surface, allowing you to raise your screens closer to eye level for more comfort. The flexible arms can extend the screens 17.5″ closer to you for a more immersive viewing experience.
Easy to install
The structured monitor stand is very easy to install, you can choose C-clamp or grommet hole as needed. For the sake of using experience, please check if your table meets the following three conditions: Material first, we only recommend wooden table. Table form secondly, The bottom of the table should preferably be free of any beams or panels that may interfere with installation. Table thickness thirdly,'C' clamp fits 0.39"-2.56" while grommet mount fits 0.39"-2.17".
Advanced Technology -Tested for 20,000 cycles, o...
Advanced Technology -Tested for 20,000 cycles, our dual monitor arm holds the screen securely in place while allowing for smooth, easy adjustments. Additionally, the long service life of it will enhance your experience.