Monitor Mounts

Dual Monitor Arm, Tool-Free VESA

Name: Dual Monitor Arm, Tool-Free VESA
Brand: ErGear
SKU: B0FPXFYG17
Price: 34.99 USD
Availability: InStock
Rating: 4.5 (6307 reviews)

Two screens on a desk that changes

$34.99~~$49.99~~★★★★★ 4.5 (6,307)

Buy All 18 mounts

Nothing is sold on this site. Every buying link opens the same item at the retail partner who handles payment, delivery and returns.

What it is for

A dual mount is twice the installation of a single one, which is why toolless assembly matters more here than on a one-screen arm. This model takes two 13 to 32 inch panels at up to 19.8 lbs each and puts together by hand, so a two-screen setup can be dismantled for a move and rebuilt at the other end in minutes rather than an evening.

Check before you order. This mount fits the 100 by 100 mm VESA pattern only. Small monitors with 75 by 75 mm holes will not attach without an adapter plate, which is not in the box.

What assembly actually means

Hand-tightened throughout apart from the VESA screws into the monitors. The sequence that works is base, post, both arms empty, then screens one at a time, checking the post stays vertical as the second screen goes on and shifts the balance.

What it changes

Rebuilding a dual setup by hand makes it realistic to take the mount to a new desk instead of buying another one.
Nearly 20 lbs per arm covers most 27 inch panels, which is where dual setups usually sit rather than at the 32 inch maximum.
Adjusting spacing by hand during the day allows the two screens to be pushed together for focused work and spread for comparison.

In one line each

Toolless dual arm for two 13 to 32 inch screens
Capacity 19.8 lbs per arm
VESA 100 by 100 mm only
Clamp or grommet base
Hand-adjustable joints throughout the arm

Published figures

Screens	2
Screen size	13 to 32 in
Load per arm	19.8 lb
VESA	up to 100x100 mm
Mounting	Tabletop clamp
Movement	Tilt, swivel, rotation, height
Max tilt	80 degrees
Fitting	Tool-free VESA plate
Colour	Black
Model reference	B0FPXFYG17

Figures as published for this model. Anything that has never been published is left out rather than estimated.

Where this one sits among the 18

The same figures as every other page in this section, lined up against the section itself. Being the biggest at something is not the same as being the best at it, so the last column says where a number puts this model and leaves the judgement to you.

Figure	This model	All 18 mounts	Where that puts it
Largest screen it takes	32 in	27 to 49 in	Bigger than 2 of the other 17
Smallest screen it takes	13 in	13 to 17 in	The smallest of the 18
Weight per arm	19.8 lb	17.6 to 37.4 lb	Stronger than 7 of the other 17
Screens carried	2	1 to 3	More than 6 of the other 17

Ranges cover only the mounts that publish the figure at all; a model that has never published one is left out of that row rather than counted as a zero.

Where it sits in the range

Of the 18 mounts in this section this is the ninth cheapest: 8 cost less, 9 cost more, and the section runs from $19.98 to $89.99. It carries a published list price of $49.99, so the figure above is below that rather than the usual asking price.

There is no figure here on which it beats everything cheaper in the section, so if none of the 8 below it is missing something you need, the difference is colour, top size or finish rather than capability.

It carries 6,307 customer reviews at 4.5 out of five, which is the highest rating in the section. Those numbers come from the retail listing and are reproduced rather than curated, including when they are unflattering.

What the box says

The product description exactly as it ships with the listing, unedited, so everything written above can be checked against it.

Compatible with Wide Screens

The ErGear heavy-duty dual monitor arm is designed to fit most 13″-32″ flat or curved monitors, supporting up to 19.8 lbs, and it's compatible with VESA mounting patterns of 75x75mm or 100x100mm. Be sure to verify your monitor's VESA pattern, size, and weight before purchasing to ensure a perfect fit.

Tool-Free VESA Mounting

Set up in just three simple steps! The upgraded VESA plate on our computer monitor mount allows for quick, tool-free installation, saving you time and eliminating the need for complicated assembly. Mount this stand securely to your surface of choice using the one-piece C-clamp (for desks 0.39″ to 2.56″ thick) or the optional bolt-through grommet mount (for desks 0.39″ to 2.95″ thick).We only recommend installing it on a wooden desk, preferably with no crossbeam blocking the underside. For specific diagrams and instructions, please refer to the guidance in section A+ of the manual.

Dynamic Angle Adjustments

Offering independent, customizable positioning for both monitors, this premium monitor desk mount allows precise height adjustments up to 17.5″ and extend up to 18.1″. It features +80 degrees/-50 degrees tilt, ±90 degrees swivel, and 360 degrees rotation. Easily adjust your monitors to the perfect position for enhanced comfort and a workspace that works for you.

Tidy Cable Management

The upgraded cable clips open easily with no tools required, making cable organization faster and more convenient. By elevating your monitor, this double monitor arm frees up valuable desk space and keeps your cables neatly arranged, creating a clean, organized workspace that helps you stay focused and productive.

Built to Last

This dual monitor stand is engineered for long-term stability with an upgraded VESA head with 50% smaller gap and tighter-fitting VESA panel. These enhancements provide added support, to make sure your monitor stays securely mounted. Tested for over 20,000 cycles, the premium core offers smooth and reliable movement, ensuring strong performance for years of use.